– Login Admin IP Address

To access the admin page type into your web browser's address bar or click on the link below.


Detected IP Address

Local IP Address:
Admin Router Login
Based on your local ip address, this should be your router admin ip address. This is only the case if you are in the same network as your wifi router.

Default logins for

IP Address:
IP Address:
IP Address:
IP Address:

Login Steps

  1. Find Your Router’s IP Address
    If you want to log in to your router’s console, the first thing to do is find your current IP address. If you have forgotten or don’t know the address, you are unlikely to log in to the page. The good news is, there are easy ways to find the address.
    1. One method of accessing your IP address is to type ipconfig at your command prompt. The IP address of the default gateway is the current and ready-to-use IP address of your router.
    2. Another method of checking the IP address is by using the Network and Sharing Center on your PC. You must first open the Panel, then click on the “Links” tab and then check the details. You can easily see the IP address you are looking for under the IPv4 Default Gateway column.
    3. On Mac, you will have the option to check the IP address in the utilities window under the netstat direction.
    4. This may be your tablet or phone on your mobile device, you can tap the advanced features of your connection in the settings to find the IP address.
  2. Log In to Your Router
    After you find the IP address of your router through the default gateway alternative, you can log on to the network. First, you must type the IP address of your router in the program. The address for this case is After that, the program will turn into a connection through the address, for example, and then open the login screen for you. Here, you will need to enter the default user name and password for the router login. If you have previously changed the password, you can sign in with this information. After providing the requested user information, you will have the option of accessing your router’s control panel and changing its configuration.
  3. Reset and Troubleshoot Router
    When we change the settings of our router, it continues to work theoretically but fails the network association. In this way, we have to correct these changes. You need to save the history setting data that you will change. In any case, when you have the chance to do everything right and the router may still not work, the only remedy is to reset the router. You can touch the reset button on your router for 15-30 seconds to reset. The router will reboot and set with all default settings. IP Address

Any computer or device connected to an existing network is systematically identified by the IP address assigned to it. This network can be an Internet network or a smaller local network part. In general, the IP address is a name that is accessible to everyone on the Internet. A local IP address, on the other hand, is a unique name, such as the fingerprint your router assigns to each device connected to it. Everyone on the Internet and only devices connected by the router to the local IP address cannot access this network.

One of the most common private IP addresses for business networks or networks to be used in workplaces and offices is, which can be assigned to any device on the local network in the address range. However, this address is set by router manufacturers such as Cisco and Infinity as the default IP address of the broadband router.

When to Use the IP address IP serves as the default IP address of many routers, allowing you to access them and change their settings over the network. Setting changes can include opening a port scope, setting a firewall on your network, or clustering an important agent that receives each of your messages.

Many administrators prefer to select this address for routers they use in their business network, as it is not difficult to remember. Many household appliances also use this address to simplify it. However, some of the more popular IP addresses for routers are and

IP Address Conflict

Suppose you have multiple routers at home and use them together, but they are unlikely to have the same IP address. This means that when you try to log in to one of the routers, it may show you the page of another brand of router or an error screen will appear. To avoid these situations, you must set up a static IP address for your device through your administrator so that it does not conflict with another device.

You must also type your address correctly on the page in the web browser. Otherwise, if you type an incorrect address, the results indicate that the device is not available. Make sure you have typed the correct address of your router before typing.

Manufacturers Using IP Address

There are many brands of routers that use the IP address because it is very simple and easy to remember, so users can easily remember it. It is also ideally suited for business networks with many devices traditionally, and many home routers use this IP address. By default, we have listed the most popular router manufacturers using the IP address

  • Cisco
  • SMC
  • Technicolor
  • Arris
  • Aztech
Models using






-SMCD3GNV (Comcast)admin/password
-SMCD3GNV v2?cusadmin/highspeed

Information about the router brands and models is obtained from DD-WRT.