Belkin Default Login – Username, Password and IP Address

Detected IP Address

Local IP Address:
Admin Router Login
Based on your local ip address, this should be your router admin ip address. This is only the case if you are in the same network as your wifi router.

Default IP for Belkin

Default logins for Belkin

IP Address:

Belkin Router Login If you want to change the settings of your Wi-Fi network, secure the network, or make some other improvements to the configuration, you will need to log in to your Belkin router. The router’s web interface is populated as a control panel where you can see each of the network settings. You can sign in and use any improvements you need.

To access the login interface of a Belkin router, you will need a Belkin router, network access, and a web browser. You can access the network with a LAN cable or with your Wi-Fi connection. You will also have a connection device such as a computer, phone, or tablet with a web browser on it to access the home page.

Belkin Login Steps

  1. Connect to the Network
    You must have a network connection before you can access your router. You cannot access your wireless network without entering your username and password. However, if you have forgotten or don’t know the password for your Wi-Fi, you have to connect your device with an ethernet cable, so you can access the network without having to enter the password.

    Connection with the network is very important, otherwise you will not have the option to access your router or apply each of the capabilities appropriately. You can even access your Belkin router from a remote area at home with the help of a VPN.

  2. Open the Browser and Navigate to
    Once connected to the network, you can access the home page by placing the Belkin router login IP in your internet browser. IP addresses for various routers may vary, but the best-known address for accessing your Belkin router is Another normal IP address for logging in to your router is You must type this IP address in the program tab and press enter.

    The address will return to and will take you to the login page used by Belkin brand routers. However, in the worst case, if none of the above IP addresses work for your system, you can check the default list of Belkin IP addresses for your router model we provide for you on this website.

  3. Enter Default Credentials for Belkin Router
    Most of the problems are the user names used to access your Belkin router. These user names can be administrator or Administrator, depending on the model. Similarly, the password can be open, administrator or password. If you have not changed your Belkin login accreditations, you can enter the password in the appropriate field to access the router. For the most part, the default password is turned on and you only need to touch send. Otherwise, you may find them here or check your router’s connections, in case you might ignore default accreditations. If you have just reset your password, you can place it and access your Belkin router.

    If none of the above options work for you, another user may have reset the password without telling you. In this case, you must reset your router to the factory default settings, which is the simplest way. With the help of a paper clip or toothpick, you must press the reset button on your router for 15-20 seconds. Your Belkin router will reboot and you will be able to log in with the default blank password.

  4. Change Settings/Configure the Belkin Router
    After you have completed logging on to the Belkin router, you can access the router’s control panel and change or customize the settings you want. LAN and wireless setup on the Router’s Panel, firewall, utilities, and media features, and so on. options. You must first check the connection status of the router and then router to other configurations. We recommend that you use extreme caution when changing settings on the router to avoid damaging your network connection or causing any problems. As a precaution, you should note your router’s default settings or current configuration on a sheet, so that if something goes wrong, you can restore everything.

Troubleshooting if Belkin Router Stops Working

If your router or network does not work as before after changing settings, you must undo your changes. Therefore, as mentioned earlier, you should always record the values of the previous settings as a preventive measure. If you cannot change anything and cannot connect to the network, you should try resetting the router as a next remedy. You can find instructions on how to reset your router online first. However, if none of the methods work, you should perform a hard reset as the only option. To do this, you must press the reset button on the router for 15-20 seconds using a paper clip or toothpick.


Setting up a firewall on your network or setting up a specific system for various IP addresses on your network is not an easy task. All you need is to change the settings on your router as you like. The Belkin router accompanies a standard IP address where you can log in and access all of its capabilities. For security reasons, you can sign in or change with a default password. You can change the configuration of the router as desired and even re-adjust it to your needs.

Models using Belkin
(My Essentials) ME1004-R-
BoB (F1PI243EGau, iinet)-
F5D6231-4 v1-
F5D6231-4 v2-
F5D7230-4 v1 (v1444)-
F5D7230-4 v1-
F5D7230-4 v2-
F5D7230-4 v3- -
F5D7230-4 v4-
F5D7230-4 v5- -
F5D7230-4 v6-
F5D7230-4 v7- -
F5D7230-4 v8-
F5D7230-4 v9-
F5D7230-4 vA-
F5D7231-4 v1 (v1103ee)-
F5D7231-4 v1 (v12xx)- -
F5D7231-4 v1- -
F5D7231-4 v2- -
F5D7231-4 v3-
F5D7231-4P v1-
F5D7234-4 v1- -
F5D7234-4 v3-
F5D7234-4 v4-
F5D7234-4 v5-
F5D7235-4- -
F5D7631-4 v1- -
F5D7631-4 v2- -
F5D7632-4 v1- -
F5D7632-4 v3- -
F5D7632-4 v5- -
F5D7632-4 v6-
F5D7634-4 v2-
F5D8230-4 v1-
F5D8230-4 v2-
F5D8230-4 v3-
F5D8231-4 v1-
F5D8231-4 v2-
F5D8231-4 v3-
F5D8231-4 v4-
F5D8231-4 v5-
F5D8232-4 v1-
F5D8232-4 v2-
F5D8233-4 v1-
F5D8233-4 v3-
F5D8233-4 v4-
F5D8235-4 v1-
F5D8235-4 v2 (v20xx)-
F5D8235-4 v2 (v21xx)-
F5D8235-4 v3-
F5D8236-4 v1-
F5D8236-4 v2-
F5D8236-4 v3-
F5D8631-4 v2011uk- -
F5D8631-4 v3- -
F5D8632-4 v1- -
F5D8635-4 v1-
F5D8635-4 v2- -
F5D8636-4 v1- -
F5D8636-4 v2-
F5D9230-4 v1- -
F5D9230-4 v2-
F5D9230-4 v3-
F5D9230-4 v4-
F5D9230-4 v5-
F5D9231-4 v1-
F5D9231-4 v2-
F5D9630-4 v1-
F5D9630-4 v2-
F5D9631-4- -
F6D4230-4 v1-
F6D4230-4 v2-
F6D4230-4 v3-
F6D4630-4 v1-
F6D4630-4 v2-
F7D1401- -
F7D2401- -
F7D3301- -
F7D5301 v3-
F7D6301 v1-
F7D6301 v3-
F7D6301 v4- -
F9K1001 v1-
F9K1001 v4- -
F9K1001 v5- -
F9K1002 v1-
F9K1002 v2- -
F9K1002 v3- -
F9K1002 v4- -
F9K1002 v5- -
F9K1007V1- -
F9K1009 v1-
F9K1009 v2- -
F9K1010 v2- -
F9K1102 v1-
F9K1102 v2- -
F9K1102 v3- -
F9K1103 v1admin/password
F9K1105 v1-
F9K1105 v2- -
F9K1105 v3- -
F9K1108- -
F9K1112- -
F9K1113 v1-
F9K1113 v2-
F9K1113 v4-
F9K1113 v5-
F9K1115 v2-
F9K1116 v1-
F9K1116 v2-
F9K1117 v2-
F9K1118 v1- -
F9K1118 v2-
F9K1119 v2- -
F9K1123 v1-
F9K1123 v2-
F9K1124 v1- -
Information about the router brands and models is obtained from DD-WRT.